Everyone wants their furniture to be durable, but at the same time look appealing. Different kinds of finishes are made to address this problem. However, not all of them can withstand water. Fortunately, there are different kinds of waterproof paint for wood that can help with this problem.
Waterproofing Wooden Outdoor Furniture
Waterproofing wooden outdoor furniture is important because this type of furniture is constantly exposed to harsh elements. Simply buy some Krylon 1311 Water Resistant Matte Finish spray from Amazon and you’ll be on your way.
Spray varnish is a relativity new invention that is much more practical than paint. It only takes 15 minutes to dry and cures completely within a day. It can also be used on other types of outdoor furniture like metal and masonry.
When working with this type of lacquer, make sure that there is low humidity and that the temperature is not below 50 or above 85 degrees. Clean the surface you are going to waterproof with a brush, sand, and then use a tack cloth to wipe it after. Use a drop cloth to cover the area you are going to work on and then spray the air near the surface from side to side. It is best if you apply a lot of thin coats rather than a few thick ones. Let dry and only use after a day.
Learn about the strongest waterproof wood glue here.
Waterproofing With Tung Oil
Tung oil has been used for many years as a wood ship preservative in China. This is because Tung oil can penetrate wood and form a water repellent layer. I recommend using Hope’s 100% Tung Oil for the best results. This will accentuates the wood’s grain and make it a little darker than the original.
Before applying Tung oil, make sure to sand the surface first because the oil will not be able to hide any scratches or blemishes that are left behind. Then, apply some oil on a clean rag and rub along the wood’s grain. It is a good idea to start on the areas that are harder to reach first to avoid drips and runs. Leave the surface alone for around 30 minutes and then remove excess oil by rubbing with another clean rag. Let it dry completely before using. This usually takes weeks but the wood already absorbs the oil in around 24 hours. For best results, 3 coats should be applied. Also, make sure that you sand after each coat application.
Learn about repairing outdoor wicker furniture with Tung oil here.
Waterproofing With Polyester Resin And Acetone
Another way to waterproof your furniture is by using a polyester resin and acetone solution. This waterproof paint for wood, however, is not recommended because you can’t control the outcome of the color. However, you can test the color by trying it on an inconspicuous spot or on scraps first. To use this, thin some resin with acetone until it looks similar to thick water. This will help the resin soak deep into the wood, making it tolerant of the wood’s flexing capability. Because of this, cracking and separation of the paint is prevented.
When using polyester resin and acetone, you’re going to have to put on several coats. After your every application, mix more of the solution, but add less and less acetone each time. To know if you have enough coats, there are no more changes in the color of the solution. Waxed resin should be applied as the final coat and then the surface must be sanded after.
Waterproofing your furniture will not only protect it and increase its lifespan, but it will also keep it looking beautiful. There are many kinds of waterproof paint for wood that you can use in waterproofing your furniture. Some of them, however, may not be compatible with the wood’s original color. Knowing the different ways of waterproofing your furniture can help you determine which method to use for your furniture.
Waterproofing can prolong the life of your furniture especially if the furniture is located outdoors. There are many different kinds of waterproof paint for wood that you can use for your furniture. Because all of them are effective, it is really up to you to decide which one to use.